Saturday, November 21, 2026Sat, Nov 21 Updated

Trucking and freight news for drivers, carriers and shippers.

How to Weigh a Truck at a CAT Scale: Steps, Ticket and Axle Fixes

Weigh a truck at a CAT scale by placing each axle group on its own platform and reading the ticket. Covers legal limits and how to slide the tandems or fifth wheel.

A high-angle aerial photo capturing vibrant agricultural fields intersected by a busy road with vehicles.
Photo: Артем Дворецкий / Pexels

To weigh a truck at a CAT scale, pull onto the three-platform scale so the steer axle sits on the first platform, the drive tandem on the second and the trailer tandem on the third, then press the call button, give your truck and trailer details and pick up the printed ticket inside. The ticket lists the weight on each axle group and the gross weight. On a standard five-axle tractor-trailer, the usual federal targets are 12,000 lb (5,443 kg) or less on the steer axle in most setups, 34,000 lb (15,422 kg) on each tandem and 80,000 lb (36,287 kg) gross.

Why should you weigh a loaded truck before hitting the road?

A loaded truck can be legal on gross weight and still be overweight on one axle group, and scale houses and roadside inspectors check both. An axle that is over can mean a fine, a delay while you shift or remove cargo, and in some cases an order to stay put until the problem is fixed. Our guide to out-of-service orders and how to clear them covers what happens when an inspection stops a truck.

Weighing right after loading, before you leave the shipper’s area, is the cheapest time to find a problem. If the load itself is too heavy, the shipper can still take freight off.

How do you weigh a truck at a CAT scale, step by step?

  1. Find a CAT scale at a truck stop. The company lists locations on the CAT Scale website, and many drivers also use the CAT mobile app to find scales and pay.
  2. Pull on slowly and straight. Stop with the steer axle on the first platform, the drive tandem on the second and the trailer tandem on the third. Every tire of an axle group should be on one platform, with no wheels touching the gaps between platforms.
  3. Set the brakes and press the intercom or call button. The scale operator usually asks for your company name, truck number and trailer number, and whether this is a first weigh or a reweigh.
  4. Wait for the operator to confirm the weight is recorded, then pull off the scale so the next truck can use it.
  5. Go inside, pay and collect the ticket, or get it in the app if you paid there.
  6. Check the numbers against the limits before you drive on. If something is over, adjust and come back for a reweigh.

A bobtail tractor or a truck with fewer axles still uses the platforms the same way: one axle group per platform.

How do you read a CAT scale ticket?

The ticket shows one line per platform plus a total. Steer axle is the weight on platform one, drive axle is platform two, and trailer axle is platform three. Gross weight is the sum of the three.

  • Steer axle: compare it with the rating on the tire sidewalls and the axle, and with state rules. Many tractors are loaded to keep it at or under 12,000 lb.
  • Drive axle tandem: the federal limit for a tandem on the Interstate system is 34,000 lb.
  • Trailer axle tandem: also 34,000 lb under federal rules.
  • Gross: 80,000 lb federal maximum, unless you hold an overweight permit.

The ticket also shows the date, time, scale location and a weigh number. Keep it with your load paperwork. CAT offers a guarantee that its ticket weight is accurate, and if a state scale disagrees, the company’s published guarantee explains what to do, so read the back of the ticket or the website for the current terms.

Federal weights are only part of the picture. Axle spacing also matters under the Bridge Formula, which our article on truck weight and size limits and the Bridge Formula explains, and the Federal Highway Administration publishes the federal size and weight rules. Some states allow more or less on certain roads.

How do you fix axle weights when one group is over?

You move weight between axle groups by sliding the trailer tandems or the fifth wheel. Neither one changes the gross weight.

Sliding the trailer tandems

Moving the trailer tandems toward the front of the trailer puts more weight on the trailer axles and takes it off the drives. Moving them toward the rear does the opposite. To slide them, set the trailer brakes, pull the release handle so the locking pins come out, and ease the tractor forward or back. Then lock the pins and check by eye and with a tug test that every pin is fully seated.

Sliding the fifth wheel

Moving the fifth wheel forward shifts weight onto the steer axle and off the drives. Moving it back takes weight off the steer axle and puts it on the drives. Release the fifth wheel lock, set the trailer brakes, move the tractor a notch or two, then lock and confirm.

How much each hole or notch moves depends on the equipment and the load, so reweigh after every adjustment instead of guessing. Watch for limits on how far you can slide: some states cap the distance from the kingpin to the rear axle, and the fifth wheel position affects turning clearance between cab and trailer.

When sliding does not work

If both tandems are over, or the gross is over 80,000 lb, sliding will not fix it. The cargo has to be moved inside the trailer or partly unloaded. Call your dispatcher and the shipper before you leave.

How does fuel change your axle weights?

Diesel weighs about 7 lb per gallon (about 0.84 kg per liter), so a full set of tanks adds hundreds of pounds, mostly to the steer and drive axles. A truck weighed with half tanks can go over on the drives after a fill-up. Many drivers weigh with the fuel level they expect to carry through the next scale house, or leave room on the drive axle for a full fill. As you burn fuel during the trip, the steer and drive weights drop.

What mistakes cause a bad weigh?

  • Stopping with tires on two platforms, which splits one axle group across two readings.
  • Weighing with the trailer brakes released on a slope, which can shift weight while the scale reads.
  • Forgetting to tell the operator it is a reweigh, which can cost you a full first-weigh price.
  • Sliding the tandems without checking that all locking pins are engaged.
  • Checking only the gross weight and ignoring the steer axle.

The weight rating of your tractor also matters for licensing and some federal rules. Our page on truck classes and GVWR thresholds shows which weights trigger which requirements.

Quick answers

Does a CAT scale weigh each axle separately?

A standard CAT scale has three platforms and weighs each axle group: steer, drive tandem and trailer tandem. Two axles on one platform are reported as one number.

Can I reweigh after adjusting the tandems?

Yes. Tell the operator it is a reweigh. CAT charges less for a reweigh of the same truck within a set period after the first weigh; check the current terms at the scale.

Is 34,000 pounds the limit on every tandem?

It is the federal limit for a tandem on the Interstate system. Spacing under the Bridge Formula, state law and permits can change what is legal on a given route.

Do I need to weigh an empty truck?

An empty weigh is useful once to learn your tractor and trailer’s light weight, which tells you how much cargo you can legally take before the next load.

Prepared by TenFour News with AI-assisted drafting and automated fact checks — see our editorial policy. Spotted an error? Tell us.