Annual DOT Inspection: What Is Checked and the Records to Carry
The annual DOT inspection is a yearly check of every commercial truck and trailer against federal minimum standards. Covers components, inspectors and records.

The annual DOT inspection is a federal requirement that every commercial motor vehicle in interstate commerce, including each trailer, pass a periodic inspection at least once every 12 months. The rule is 49 CFR 396.17, and the inspection must cover every item in Appendix G of the Federal Motor Carrier Safety Regulations. The truck or trailer must carry proof of the most recent passed inspection, either a copy of the report or a decal.
Which vehicles need an annual DOT inspection?
Every commercial motor vehicle a motor carrier operates in interstate commerce needs one, and each unit is inspected separately. A tractor and the trailer it pulls are two vehicles with two inspection records. The federal definition of a commercial motor vehicle includes vehicles with a gross vehicle weight rating or gross combination weight rating of 10,001 pounds (4,536 kg) or more, so many box trucks and pickup-and-trailer combinations used for business are covered along with tractor-trailers.
- Power units: tractors, straight trucks and box trucks used in interstate business
- Trailers: dry vans, reefers, flatbeds, tankers and converter dollies
- Leased equipment: the carrier operating the vehicle is responsible for making sure it has a current inspection
Intrastate carriers follow their state’s rules. Most states have adopted the federal standard, but some run their own periodic inspection programs. If a state program is accepted by FMCSA as equivalent, a vehicle that passes it meets the federal annual requirement.
What does the annual inspection check?
The inspector checks the vehicle against the minimum standards in Appendix G, and any defect on that list means the vehicle fails until it is repaired. The main systems are:
- Brake system, including service brakes, parking brake, brake drums and rotors, hoses and tubing, air compressor, low-air warning device, tractor protection valve and pushrod travel on air brakes
- Coupling devices: fifth wheel, pintle hooks, drawbars, safety chains and kingpin
- Exhaust system, checked for leaks near the cab or sleeper
- Fuel system, checked for leaks and secure fuel tanks and caps
- Lighting devices required by the regulations
- Safe loading equipment, such as front-end structure and cargo securement points
- Steering mechanism: steering wheel lash, column, gearbox, linkage and power steering
- Suspension: springs, U-bolts, axle positioning parts and air suspension
- Frame and frame members, checked for cracks, sagging and loose or missing fasteners
- Tires, checked for tread depth, cuts, bulges and leaks
- Wheels and rims, including lock rings, studs and nuts
- Windshield glazing and windshield wipers
The tread depth minimums are the same ones roadside inspectors use: 4/32 inch on steer tires and 2/32 inch on other tires. A full walkaround of the kind described in our checklist for inspecting a used semi truck before you buy it covers much of the same ground and is a useful way to find problems before the annual visit.
Who is allowed to do the inspection?
The inspection can be done by the motor carrier’s own employee, a repair shop, a dealer or another third party, as long as the person meets the inspector qualifications in 49 CFR 396.19. The inspector must understand the inspection criteria in Appendix G and be able to identify defective components, know how to use the tools needed, and qualify by experience, training or both. That usually means one of these:
- Completion of a state or federal training program, or a program that leads to a state or Canadian certification to inspect commercial motor vehicles
- At least one year of training or experience (or a combination) as a mechanic or inspector in a motor carrier maintenance program, at a commercial garage, fleet leasing company or similar facility
The carrier must keep evidence of each inspector’s qualifications on file for as long as that person does the inspections and for one year afterward. Brake work and brake inspections have a separate qualification standard in 49 CFR 396.25.
A roadside inspection can also count. If a vehicle passes an inspection that meets Appendix G standards, such as a CVSA Level I inspection, the carrier may use that report or decal as proof of the annual inspection, provided the inspection was complete and recorded.
What records must be kept, and for how long?
The person doing the inspection must prepare a report that identifies the inspector, the motor carrier operating the vehicle, the date, the vehicle and the components inspected, and that certifies the result. The report must say that every component met the Appendix G standards.
- The motor carrier keeps the original or a copy of the report for 14 months from the report date.
- The report can be kept at the carrier’s principal place of business or where the vehicle is housed or maintained.
- The inspector’s qualification evidence is kept as described above.
Carriers with their own authority often fold these files into the same system they use for registration and insurance documents, covered in our guide to DOT number, authority and insurance requirements.
What proof has to be in the truck or on the trailer?
Each vehicle must carry proof of its last passed annual inspection. The carrier can meet this in one of two ways:
- Keep a copy of the inspection report in the vehicle.
- Put a sticker or decal on the vehicle that shows the date of inspection, the name and address of the carrier or other entity where the inspection report is kept, information that identifies the vehicle, and, if applicable, a certification that the vehicle passed an inspection under an approved state program.
Trailers need their own proof, which is why most fleets use decals on trailers rather than paper reports that can be lost when a trailer is dropped and swapped.
What happens if the inspection is missing or expired?
A missing or expired annual inspection is a violation that roadside inspectors write up, and it counts in the Vehicle Maintenance category of FMCSA’s Compliance, Safety, Accountability (CSA) program. Defects found at a roadside check can also put the vehicle out of service until repaired. The out-of-service criteria and what each inspection level covers are explained in our guide to DOT inspection levels I through VIII.
The annual inspection does not replace the other maintenance rules. Drivers still complete pre-trip checks and driver vehicle inspection reports, and carriers must keep systematic inspection, repair and maintenance records under 49 CFR 396.3. The full text of Part 396 is on the Electronic Code of Federal Regulations, and compliance guidance is on the Federal Motor Carrier Safety Administration website.
Quick answers
Is the annual DOT inspection the same as a DOT physical?
No. The annual inspection covers the vehicle. The DOT physical is a medical exam for the driver and leads to a separate medical certificate.
Does a new truck need an annual inspection right away?
A new vehicle still needs proof of a periodic inspection meeting Appendix G before it runs in interstate service. Many dealers provide one at delivery, but the carrier should confirm the report or decal exists.
Can an owner-operator inspect their own truck?
Yes, if the owner-operator meets the inspector qualifications in 49 CFR 396.19 and keeps evidence of them on file. Brake inspections require meeting the brake inspector standard as well.
How long is an annual inspection valid?
It is valid for 12 months from the date of the inspection. The next one must be completed before that date passes.


