Saturday, November 21, 2026Sat, Nov 21 Updated

Trucking and freight news for drivers, carriers and shippers.

Shipper Bid Season Explained: RFPs, Contract Rates and Routing Guides

Shipper bid season is when shippers award annual truckload lanes through RFPs. Here is how contract rates, routing guides and load rejections work.

A large dump truck parked at an industrial construction site near a building.
Photo: Vadym Alyekseyenko / Pexels

Bid season is the period, usually in the fall and winter, when large shippers put their truckload lanes out for competitive bid and award them to carriers for the coming year. The winning carriers get a contract rate per lane, and the shipper ranks them in a routing guide. When a carrier turns down a load it was offered under that guide, the shipper’s system sends it to the next carrier on the list, and eventually to the spot market.

What is a shipper RFP and who runs it?

A transportation RFP (request for proposal) is a spreadsheet-driven bidding process in which a shipper lists its lanes and asks carriers and brokers to quote them. Each lane is an origin and destination pair, usually with an estimated volume, an equipment type and notes on pickup windows, appointment rules or special handling.

Shippers often run the process through a bid platform or a third-party logistics provider. Carriers download the lane list, price what they want and upload their rates by a deadline. Many shippers hold a second round for lanes that drew no bids or bids far above their target.

Small carriers and owner-operators rarely see the big RFPs directly. They reach the same freight through brokers that win lanes, or by pursuing smaller shippers, which is covered in how to find direct shipper freight.

How are contract rates set during bid season?

Contract rates are set by each carrier’s own cost and capacity, compared against what the shipper is willing to pay. Carriers price a lane from operating cost per mile, the chance of finding a load back out of the destination, detention history at the shipper’s docks and how reliable the volume is. A lane with steady freight and a balanced return trip earns a lower rate than one that sends trucks into a place they cannot leave loaded.

Shippers compare bids against last year’s rate, the current spot market and benchmark data. They also weigh service history, such as on-time pickup, acceptance of tendered loads and claims. The lowest bid does not always win, because a cheap rate that the carrier later rejects forces the shipper onto spot freight at a higher price.

Most contract rates are quoted either as a rate per mile or as a flat rate per load on a lane, and fuel is usually handled through a separate surcharge tied to a published diesel index. The mechanics of spot and contract pricing are laid out in how truckload freight rates work.

What is a routing guide?

A routing guide is the shipper’s ranked list of carriers for each lane. The first carrier is the primary, the next is the backup, and further names are listed beneath them. Awards are often split, so one lane might give a share of its weekly volume to the primary and the rest to backups.

When a load is ready, the shipper tenders it to the primary carrier through its transportation management system or by email. The carrier accepts or rejects it within a set response window. If it rejects the load or does not answer in time, the system tenders the same load to the next carrier down the guide.

Routing guides are not static. Shippers move carriers up or down when service slips, and they add carriers when volume grows or when too many loads fall through to the bottom of the list.

What happens when a carrier rejects a load?

A rejection, also called a tender rejection or a declined tender, sends the load to the next carrier in the guide at that carrier’s contract rate. Each step down costs the shipper time. If every contracted carrier declines, the shipper buys the truck on the spot market, a process called going to spot or going deep in the guide.

The result depends on the market. When trucks are plentiful and spot rates sit below contract rates, carriers accept almost everything and the guide works as written. When spot rates climb above contract rates, a carrier can earn more by hauling spot freight, so rejections rise and lower-ranked carriers see more loads. That pattern is part of why contract rates tend to rise after a tight year, a point covered in this report on shippers rebuilding carrier relationships.

Contracts do not usually bind a carrier to accept every load. Most are commitments of intent, and the shipper’s recourse is to lower the carrier in the guide, reduce its share of the next award or drop it. A few contracts carry service requirements, so read the terms before signing.

What should carriers and owner-operators check before accepting a contract rate?

Before accepting an awarded lane, a carrier should check the rate against its actual cost and the likely backhaul. These are the items worth confirming in writing:

  • The volume estimate and whether the shipper guarantees any of it.
  • The fuel surcharge schedule and the index it follows.
  • Detention and layover terms, including how long free time lasts.
  • Accessorial charges such as lumper fees, stop-offs and driver assist.
  • How quickly the carrier must respond to a tender, and what counts as an acceptable reason to decline.
  • Payment terms and how long the carrier waits to be paid after delivery.

A carrier that bids too low to win the lane and then rejects loads to chase spot rates tends to slide down the guide. One that bids at a realistic number and accepts consistently is more likely to hold the lane the next year.

When do contract and spot rates matter most during peak season?

The gap between contract and spot rates becomes visible when demand surges. In late fall, retail freight pushes spot rates up, and carriers with contract lanes face a choice between honoring the contract and hauling higher-paying spot loads. The seasonal pattern is explained in why rates rise from Thanksgiving to Christmas.

Quick answers

When does bid season happen?

Many shippers run their main bids in the fall or winter so new rates take effect at the start of the year. Timing varies by shipper and industry, and some run bids at other times or review rates mid-year if the market moves sharply.

Can a small carrier win a lane in a big shipper’s RFP?

Yes, though large shippers often prefer carriers with enough trucks to cover the volume and a good service record. Small carriers more often win smaller shippers’ lanes, regional lanes or backup positions in a routing guide.

What is the difference between a contract rate and a spot rate?

A contract rate is agreed in advance for a lane over a period, often a year. A spot rate is a price for a single load at the time it is booked, and it moves with daily supply and demand.

Does rejecting a load break a contract?

Usually not directly. Most contracts do not force a carrier to accept every tender, but repeated rejections can lower the carrier’s rank in the routing guide and reduce its future awards.