34-Hour Restart Rule Explained: How It Resets 60/70 Hours
A 34-hour restart is 34 or more consecutive hours off duty that resets your 60/70-hour limit to zero. See how it works and the mistakes to avoid.

A 34-hour restart is a period of 34 or more consecutive hours off duty that resets a property-carrying driver’s 60-hour or 70-hour weekly limit to zero under the federal hours of service rules. After a restart, the driver starts a fresh 7-day or 8-day period with the full 60 or 70 hours available again.
The restart is optional, and the time off must be unbroken. A break of 33 hours and 59 minutes does not count, and any on-duty task in the middle starts the count over.
What is the 60/70-hour limit that the restart resets?
Property-carrying drivers may not drive after being on duty 60 hours in 7 consecutive days or 70 hours in 8 consecutive days. Which limit applies depends on whether the carrier operates vehicles every day of the week: carriers that do not run every day use 60 hours in 7 days, and carriers that run every day can use 70 hours in 8 days.
The limit counts all on-duty time, not just driving. Loading and unloading, inspections, fueling, paperwork and waiting while still responsible for the truck are on-duty time. The window rolls forward each day, so hours recorded on the oldest day drop out as it passes out of the 7-day or 8-day period. The full rules are covered in the guide to the 11, 14 and 60/70 hour limits.
How does a 34-hour restart work?
The steps are the same for every driver:
- Change duty status to off duty or sleeper berth, and let the logging device record it.
- Stay off duty or in the sleeper berth for at least 34 consecutive hours. Time in the two statuses can be combined.
- When the 34 hours are complete, the earlier on-duty hours no longer count toward the 60/70-hour limit.
- Go back on duty. New hours start building toward the 60 or 70 limit from zero.
Here is a simple example. A driver on the 70-hour/8-day limit who has logged 68 hours has 2 hours left. After a completed restart, that driver has the full 70 hours available.
Does the restart also reset the 11-hour and 14-hour limits?
Yes, in effect. The 11-hour driving limit and the 14-hour on-duty window reset after 10 consecutive hours off duty, and a 34-hour break is longer than that. The reverse does not hold: a normal 10-hour break resets the daily limits but leaves the 60/70-hour total untouched.
The 30-minute break requirement, which applies after 8 hours of driving without a qualifying interruption, is a separate rule.
Do drivers have to take a 34-hour restart?
No. The rolling window gives hours back by itself as older days leave the 7-day or 8-day period, so a driver who plans loads carefully may never need a restart. The restart is a faster way to recover hours, useful when a driver is close to the limit and the next load has a firm appointment. Keep in mind that it is a legal reset, not a substitute for sleep. Fatigue is the reason the limits exist.
What are the most common 34-hour restart mistakes?
- Coming back on duty a few minutes early. Only 34 full hours count.
- Doing on-duty work during the break. Fueling, paperwork, loading, unloading or supervising the truck while it is loaded or unloaded breaks the stretch. A driver waiting at a dock is on duty unless fully relieved of responsibility, and delays around unloading, such as the situations covered in the lumper fees guide, can eat into a planned restart.
- Mixing up the 10-hour reset and the 34-hour restart. Only the 34-hour break resets the 60/70 total.
- Applying the 24-hour restart. Special 24-hour provisions exist for certain operations, oilfield work for example, and do not apply to regular long-haul drivers.
- Believing older rule versions still apply. Earlier versions of the restart rule added conditions such as two overnight periods between 1 a.m. and 5 a.m. Those conditions are no longer in force.
- Not reviewing the electronic log. Logging devices can misclassify movement, such as personal conveyance that does not meet FMCSA guidance, and a mislabeled stretch can break the restart.
- Scheduling the restart without the delivery appointment in mind. The pickup and delivery times printed on a trucking rate confirmation show how many hours of room the load leaves.
How can a driver confirm a restart counted?
Look at the log for an unbroken block of off-duty or sleeper-berth time of 34 hours or more, then check the cycle hours remaining shown on the device. If the available hours did not return to the full 60 or 70, something on the log probably interrupted the break. Contact the carrier’s safety or log department to review it, and do not edit the record to make the numbers look right.
The regulation itself is in 49 CFR Part 395, available from the Electronic Code of Federal Regulations, and the Federal Motor Carrier Safety Administration publishes plain-language guidance on hours of service.
Quick answers
Can a driver take the 34 hours in the sleeper berth?
Yes. Off-duty time and sleeper-berth time both count toward the 34 consecutive hours, and the two can be combined as long as nothing interrupts the stretch.
How often can a driver use a restart?
Current rules set no limit on how often a driver may use one. Older versions of the rule did restrict it, which is one reason outdated advice still circulates.
Does personal conveyance interrupt a restart?
Personal conveyance counts as off duty only when it fits FMCSA guidance for personal use of the truck, such as moving to a safe place to rest. Movement that serves the carrier’s business is driving time and ends the restart.
Does the restart erase violations already on a log?
No. A restart resets the available hours going forward. It does not change what was recorded before it, and a past violation stays on the record.



