Saturday, November 21, 2026Sat, Nov 21 Updated

Trucking and freight news for drivers, carriers and shippers.

Dry Van vs Reefer vs Flatbed Rates: Why They Differ by Trailer

Dry van, reefer and flatbed spot rates differ because each trailer serves different freight, equipment supply and seasons. Here is what moves each.

Dry van, reefer and flatbed spot rates differ because each trailer type hauls different freight, costs a different amount to own and run, and has its own pool of trucks competing for loads. Reefer and flatbed usually pay more per mile than dry van because the equipment costs more and the work is more demanding. Each market also swings on its own drivers: retail demand for vans, produce and food seasons for reefers, construction and industrial activity for flatbeds.

A spot rate is the price paid per mile for a single load booked outside a long-term contract. Load boards and rate indexes publish it separately for each trailer type, since a shipper cannot swap a pallet of frozen food into a flatbed or a steel coil into a van. For a broader look at the equipment itself, see this comparison of trailer types.

Why does a reefer usually pay more than a dry van?

A reefer trailer carries its own refrigeration unit, which burns diesel, needs maintenance and costs more to buy than a plain box. The carrier pays for that equipment whether or not a load needs cooling, and the driver is responsible for keeping the set temperature for the whole trip.

Reefer freight also has tighter delivery windows. Food that spoils cannot sit at a dock for a day, so shippers pay for trucks that show up on time. Recent coverage shows the gap in practice: see how reefer spot rates rose to $2.78 a mile ahead of Thanksgiving, when holiday food shipments pulled trucks into the market.

What moves dry van rates?

Dry van is the largest segment of truckload freight, so its rate follows general consumer and retail demand more than any specialty factor. Because so many carriers own vans and almost any driver can pull one, the supply of trucks is large and rates tend to be the lowest of the three.

  • Retail and import volumes: more boxes moving from ports and distribution centers means more loads per truck.
  • Seasonal peaks: the weeks before major holidays lift demand, and the weeks after often cool it.
  • Diesel prices: fuel is a large share of a carrier’s cost, so a change in diesel shifts the rate a carrier needs to break even.
  • Truck supply: when carriers close or drivers leave, fewer trucks chase the same freight and rates rise.

Examples from this site include dry van rates reaching $3.05 a mile and a stretch where van rates hit $3.49 a mile as truckload demand rose.

What moves flatbed rates?

Flatbed rates follow building and industrial activity: lumber, steel, pipe, machinery and construction materials. These loads are open to the weather and need securement with straps, chains and tarps, so the work is slower and more physical than hauling a sealed box.

Several factors push this market:

  • Construction season: demand for building materials is stronger in warmer months and weaker in deep winter in many regions.
  • Industrial and energy projects: a large project can draw flatbeds to one region and tighten supply elsewhere.
  • Equipment and skill: loading, tarping and securing take training, and fewer drivers want the job, so the pool of trucks is smaller than for vans.
  • Regional imbalance: flatbed freight clusters near mills, ports and job sites, so a truck can deliver into an area with little to haul back.

Flatbed moves can be sharp in both directions. One report covers flatbed rates reaching $2.63 a mile, while another shows a drop of nearly 8 cents in one week.

Why do the three markets move at different times?

Each trailer type has its own mix of customers, so a shock that hits one market may barely touch the others. Produce season lifts reefers while construction slows flatbeds. A retail rush lifts vans while a refrigerated fleet sits unaffected.

Trailers also cannot always be moved between markets. A carrier with only dry vans cannot take a flatbed load tomorrow, and switching equipment means buying or leasing it. That keeps the three markets partly separate, even when all three feel the same fuel price or the same regulatory change.

What else affects every trailer type?

Some factors apply to all three markets at once.

  • Fuel: a higher diesel price raises the cost of every mile.
  • Regulation: rules on driver hours, equipment and licensing, set by agencies such as the Federal Motor Carrier Safety Administration, affect how many trucks and drivers can work.
  • Broker and carrier failures: when capacity leaves the market, rates tend to firm up.
  • Lane direction: a load headed into a region with little return freight usually pays more than one headed out of a busy hub.

How should a driver or small carrier use this?

Compare rates within the same trailer type and the same lane, not across types. A reefer rate and a dry van rate are different products, and one cannot be read against the other without accounting for fuel, equipment and delivery requirements. Track your own cost per mile first, then check whether a posted rate covers it with a margin.

When reading a rate report, note the date, the lane and whether the figure includes fuel. Spot rates move week to week, and a single week rarely says much about a lane over a season.

Quick answers

Which trailer type has the lowest spot rate?

Dry van usually has the lowest rate per mile of the three, because the equipment is common, the freight is the broadest and many carriers compete for the same loads.

Do reefer and flatbed always pay more than dry van?

They usually do, but not on every lane or every week. A tight van market can close the gap, and a weak reefer or flatbed week can narrow it too.

Can a van carrier switch to reefer or flatbed to earn more?

It is possible, but it means buying or leasing different equipment and learning different work: temperature control for reefers, or securement for flatbeds. The higher rate has to cover the added equipment cost.

Does the spot rate include fuel?

Some reports include fuel and some show it separately. Check how the source defines the rate before comparing figures from different places.