Trucking Cost Per Mile: Fixed and Variable Costs With an Example
Trucking cost per mile is total yearly operating costs divided by total miles driven. See the fixed and variable costs and a worked example.
An owner-operator’s cost per mile is total operating costs for a period divided by total miles driven in that period, loaded and empty. Add up every fixed and variable expense for a year, divide by the miles you ran, and the result is the minimum you must earn on every mile just to break even.
Most owners calculate it from twelve months of records, because a single month can be thrown off by a large repair or a slow week.
How do you calculate trucking cost per mile?
Use this formula: (annual fixed costs + annual variable costs) ÷ total annual miles = cost per mile. Total miles means every mile the truck turned a wheel, including deadhead (empty) miles, not only the paid ones.
The same calculation can be done in two parts. Divide fixed costs by miles to get a fixed cost per mile, divide variable costs by miles to get a variable cost per mile, and add the two. Splitting them shows which part of the number you control and which part moves with the road.
Which costs are fixed?
Fixed costs stay roughly the same whether the truck runs 60,000 miles or 120,000 miles. Because they do not change with miles, the cost per mile falls as you drive more and rises as you drive less. Typical fixed costs are:
- Truck and trailer payments, or lease payments
- Insurance premiums, including primary liability, physical damage and cargo coverage
- Permits, licenses and registration fees, including the federal heavy vehicle use tax filed with the Internal Revenue Service
- ELD subscription, phone, load board and software fees
- Accountant or bookkeeping costs
- Truck parking or storage at home
Which costs are variable?
Variable costs rise and fall with the miles you drive. Fuel is the largest. Others include maintenance and repairs, tires, tolls, scale fees, and oil and fluids. Many owners also set aside a repair reserve per mile so a large breakdown does not hit the bank account all at once.
Fuel cost per mile is the price per gallon divided by miles per gallon. Fuel tax is part of that picture for interstate operators, and the IFTA fuel tax reporting guide covers how the quarterly filing works.
What does a worked example look like?
The numbers below are illustrative only. They are an example of the method, not averages or benchmarks, so replace each figure with your own records.
Assume one truck that runs 100,000 total miles in a year, 88,000 of them loaded.
Example fixed costs per year
- Truck payment: $21,600 ($1,800 a month)
- Insurance: $14,400 ($1,200 a month)
- Permits and fees: $3,000
- ELD, phone and software: $1,800
- Bookkeeping: $1,200
- Total fixed: $42,000, or $0.42 per mile
Example variable costs per year
- Fuel: 16,000 gallons (100,000 miles at 6.25 miles per gallon) at $4.00 a gallon is $64,000, or $0.64 per mile
- Maintenance and repairs: $15,000, or $0.15 per mile
- Tires: $5,000, or $0.05 per mile
- Tolls and scale fees: $3,000, or $0.03 per mile
- Total variable: $87,000, or $0.87 per mile
Fixed plus variable is $129,000, and $129,000 ÷ 100,000 miles gives a break-even cost of $1.29 per mile in this example.
How do you turn cost per mile into a rate target?
Add the pay you want to take home, then divide by the miles that actually earn revenue. In the example, the owner wants $60,000 in pay. Costs plus pay come to $189,000.
Spread over all 100,000 miles, that is $1.89 per mile. Brokers and shippers pay on loaded miles only, so divide $189,000 by 88,000 loaded miles instead. The result is about $2.15 per loaded mile, which is the number to compare against a quoted rate.
The explanation of spot, contract and rate-per-mile pricing shows how that figure compares with what freight pays, and the fuel surcharge guide shows how part of fuel cost can be recovered on a load. Owners weighing the numbers against a paycheck job can use the owner-operator and company driver cost comparison.
What mistakes make the number wrong?
- Leaving out deadhead miles. Counting only loaded miles in the denominator overstates how well the truck is doing.
- Skipping a repair reserve. Costs that arrive irregularly, such as an engine repair or a set of tires, still belong in the yearly total.
- Treating your pay as a cost you will get later. Without a pay target, a break-even rate leaves nothing for you.
- Using old fuel prices. In the example, a 50 cent rise in the price per gallon at 6.25 miles per gallon adds $0.08 per mile.
- Mixing time periods. Use one full year of expenses with the miles from the same year.
- Forgetting taxes and downtime. Income tax, unpaid days in the shop and waiting at docks affect how many paid miles a year produces.
Quick answers
Is cost per mile the same as rate per mile?
No. Cost per mile is what it costs to run the truck. Rate per mile is what a load pays. The rate has to cover the cost per mile with some profit left over.
Should owner-operators include their own pay in cost per mile?
A break-even figure usually leaves it out, and a target rate adds it. Calculating both tells you the lowest rate you can accept and the rate you are aiming for.
How often should cost per mile be recalculated?
Review it at least each quarter, and again whenever a large item changes, such as insurance renewal, a new truck payment or a big move in diesel prices.
Where can a new owner-operator check federal requirements?
The Federal Motor Carrier Safety Administration lists the registration and safety requirements that apply to carriers, and those fees belong in the fixed cost total.


