Daimler and Paccar Recall Nearly 4,900 Trucks Over Driveshaft Defect
Freightliner, Western Star and Kenworth are recalling nearly 4,900 2027-model trucks over a driveshaft part. See the models, build dates and repair plan.

Two of the largest US truck builders have pulled back close to 4,900 new rigs. Daimler Truck North America and Paccar say a retaining part may be absent from driveshafts that Cummins supplied, according to HDT Trucking Info. If that happens, the shaft could come apart from the truck during operation.
The companies think the share of trucks with an actual flaw is small. A driver who has one may feel shaking or hear odd noises from the driveline before anything fails.
How the defect works
The part in question is a snap ring inside the slip yoke. When it is not there, pieces of the driveline can shift out of their proper positions, and the bearings or the whole shaft may then come loose from the vehicle.
The affected shafts belong to the RPL10, RPL14, RPL20, RPL25, RPL35 and 176MXL series.
Daimler’s share of the recall
Daimler is calling back nearly 3,900 Freightliner and Western Star trucks and puts the rate of real defects at roughly 1%. Only 2027 model-year trucks assembled from July through October 2026 are included, and the exact models depend on the build. They are:
- the Cascadia, including the fifth-generation version
- the Business Class M2
- the 108SD and 114SD
- the Western Star 47X and 49X
Paccar’s share
Paccar’s recall covers 982 Kenworth trucks, and it expects fewer than 1% of them to be faulty. These are 2027 models built during August and September 2026: the T280, T380, T680, T880 and W990.
What the repair involves
Technicians will look at each driveline to confirm the ring is installed. Where it is absent, the driveline gets swapped for a new one.
Freightliner and Western Star owners will be sent to service centers authorized by Cummins. Kenworth dealers will do the checks and any replacements, and the work costs the owner nothing. Letters to owners are planned for January 2027.
Why it matters to fleets and owner-operators
A shaft that detaches from a moving truck is a safety risk, and every recalled unit will need a visit to a shop. The list spans a wide range of models, from the Cascadia and T680 to the M2 and W990, so carriers and owner-operators running new 2027 equipment could be involved.
HDT does not say how an owner can learn ahead of time whether a given truck is one of the few with the flaw. The only warning signs it describes are vibration and noise from the driveline.
Operators with 2027-model trucks from the July to October 2026 build window can compare their model and build date with the lists above. Official owner letters are the next scheduled step.
Source: HDT Trucking Info


