Saturday, November 21, 2026Sat, Nov 21 Updated

Trucking and freight news for drivers, carriers and shippers.

Sleeper Berth Split Rules: 7/3 and 8/2 Explained With Examples

A sleeper berth split pairs 7+ hours in the berth with 2+ hours of rest, and neither counts against the 14-hour clock. See 7/3 and 8/2 examples.

A yellow truck cab parked in an outdoor lot surrounded by other vehicles and trees.
Photo: Andy Coffie / Pexels

A sleeper berth split lets a property-carrying driver cover the required 10 hours off duty in two pieces: at least 7 consecutive hours in the sleeper berth, plus a separate period of at least 2 consecutive hours in the berth, off duty, or a mix of both. Together the two periods must add up to at least 10 hours. The 7/3 and 8/2 splits are the two common combinations, and time spent in both periods is left out of the 14-hour window, which is why drivers say a split pauses the clock.

The rule sits in 49 CFR 395.1(g)(1) and applies to drivers of property-carrying commercial motor vehicles with a compliant sleeper berth. The Federal Motor Carrier Safety Administration publishes the hours-of-service rules, and the basics of the 11-hour, 14-hour and 60/70-hour limits are covered in the guide to hours of service rules for truck drivers.

Which sleeper berth splits are legal?

Any pair of rest periods is legal if the longer one is at least 7 consecutive hours in the berth, the shorter one is at least 2 consecutive hours, and the two add up to at least 10 hours.

  • 7 hours in the berth plus 3 hours off duty or in the berth (7/3).
  • 8 hours in the berth plus 2 hours off duty or in the berth (8/2).
  • 7.5 hours plus 2.5 hours, or any other mix that meets both minimums and totals 10 hours or more.

The two periods can come in either order. The 7-hour or longer period must be spent in the sleeper berth. The shorter period can be off duty, sleeper berth, or a combination of the two, but it must be one unbroken stretch of at least 2 hours.

How does a split pause the 14-hour clock?

Normally the 14-hour window starts when you come on duty after 10 hours off and runs without stopping, even while you eat, load or nap. With a valid split, the time inside both rest periods is not counted against the 14 hours.

Once you finish the second period, the count starts from the end of the first period. Everything before that first period drops out, and the stretch between the two periods carries forward. The second period is excluded from the count. Until the second period is done, the earlier hours still count, so you must stay within the 11-hour and 14-hour limits at every point before the pair is complete.

An ELD does this arithmetic for you, but you still need to know it. Compare the ELD display with the text of the rule if a number looks wrong.

Example 1: an 8/2 split, step by step

  1. At 6:00 a.m. you come on duty after a full 10 hours off and drive until 1:00 p.m. That is 7 hours of driving and 7 hours of the 14-hour window used.
  2. From 1:00 p.m. to 9:00 p.m. you rest in the sleeper berth for 8 hours. The window stays at 7 hours used.
  3. From 9:00 p.m. to 1:00 a.m. you drive 4 more hours. Driving now totals 11 hours, so you must stop. The window shows 11 hours used.
  4. From 1:00 a.m. to 3:00 a.m. you stay off duty for 2 hours. The 8-hour and 2-hour periods make a valid pair of 10 hours.
  5. At 3:00 a.m. the count restarts from the end of the first period at 9:00 p.m. Only the 4 hours of driving after it count, and the 2-hour period is excluded. You have 7 hours of driving left and 10 hours left in the window.

Without the split, the 11 hours of driving would be used up and you would need a full 10 hours off before moving again.

Example 2: a 7/3 split with the short period first

  1. At 7:00 a.m. you come on duty and drive 5 hours, until noon.
  2. From noon to 3:00 p.m. you are off duty for 3 hours. This is the short half of the pair.
  3. From 3:00 p.m. to 8:00 p.m. you drive 5 more hours. Driving totals 10 hours. The window shows 10 hours used, because the 3 hours off duty are excluded from the 13 hours that passed.
  4. From 8:00 p.m. to 3:00 a.m. you rest 7 hours in the sleeper berth. The 3-hour and 7-hour periods complete the pair.
  5. At 3:00 a.m. the count starts from the end of the first period at 3:00 p.m. Five hours of driving count and the 7-hour period is excluded. You have 6 hours of driving left and 9 hours left in the window.

What mistakes break a split?

Most failed splits come from a rest period that is slightly too short or logged in the wrong status.

  • Spending the 7-hour period off duty instead of in the sleeper berth.
  • Pairing periods that total less than 10 hours, such as 7 hours and 2 hours, or 6 hours and 4 hours.
  • Interrupting the 7-hour or the 2-hour period with on-duty time or driving.
  • Driving past the 11-hour or 14-hour limit before the second period is finished.
  • Logging the wrong duty status on the ELD, so the rest period is not recorded as qualifying time.
  • Using a truck without a compliant sleeper berth.

Does a split change any other limit?

A split does not raise the 11-hour driving limit, and it does not change the 60-hour and 70-hour on-duty limits, which keep counting all on-duty time. A sleeper berth or off-duty period of at least 30 minutes also satisfies the 30-minute break requirement after 8 hours of driving.

A full 10 consecutive hours off duty is still a valid way to start a new shift if you prefer a simple schedule. Many hot shot rigs have no sleeper berth, so a split may not be available to them. The hot shot trucking requirements article covers ELD rules for those operators.

Quick answers

Can the 2-hour period be spent driving?

No. The shorter period must be off duty, in the sleeper berth, or a combination of both, with no driving or other on-duty time inside it.

Is 9 and 1 a valid split?

No. The shorter period must be at least 2 hours, and the longer period must be at least 7 hours in the berth.

Where can I read the rule itself?

The text is in 49 CFR 395.1(g)(1) in the Electronic Code of Federal Regulations. Read it alongside your carrier’s policy, since carriers can set stricter rules.