Saturday, November 21, 2026Sat, Nov 21 Updated

Trucking and freight news for drivers, carriers and shippers.

Illinois Flatbed Driver Fined $44,210 at 226,150 Pounds, No Permit

A flatbed hauling a crane girder was weighed at 226,150 pounds on an Illinois bridge. The driver was fined $44,210 and has a court date in December.

A semi-truck travels across a bridge in Washington, USA, with cloudy skies and forested landscape.
Photo: Alex Kovshovik / Pexels

A flatbed driver hauling an overhead crane girder across a new bridge in DeKalb County, Illinois, was fined $44,210 for overweight, over-width and over-length violations, CDLLife reported. A portable scale put the loaded truck at 226,150 pounds, or 146,150 pounds over the limit.

The stop happened at about 10 a.m. on Friday, Nov. 13, on the new Peace Road bridge, between Freed Road and Illinois Route 64. The driver did not have the permits required for an oversize and overwidth load.

How the stop unfolded

According to Rockford News First, an officer saw the flatbed cross the bridge carrying a Konecrane overhead crane girder and pulled it over. The officer then found that the 48-year-old driver had no proper permits for the load. A portable scale gave the weight, and officers also confirmed that the load was too wide and too long for Peace Road.

The truck was headed from Indiana to Wisconsin. The driver works for a trucking company based in Maryland and lives in Nacogdoches, Texas. The driver has a court date on Dec. 29.

The numbers behind the fine

The scale reading and the overage both come from the report. The truck weighed 226,150 pounds, and the overage of 146,150 pounds is the figure officers cited. The fine of $44,210 is the combined total for three charges: overweight, over-width and over-length. The officer spotted the truck as it crossed the bridge, and the weighing followed.

What the sheriff’s office said

The DeKalb County Sheriff’s Office issued a news release about the stop. It said overweight trucks “dangerously extend stopping distances” and compromise steering and stability. The office also listed brake fade and tire blowouts as mechanical failures that heavy loads can set off, and said they cause costly damage to local roads and bridges.

Why it matters for drivers and carriers

Oversize and overweight loads need permits, and the case shows how much a missing permit can cost when a load is far above the limit. The $44,210 total covers three kinds of violations at once: weight, width and length. Flatbed and heavy-haul drivers who carry equipment such as crane parts face the same permit questions on every route, and local roads and bridges can carry tighter limits than the highway the load started on. Readers who want the federal baseline can check the guide to truck weight and size limits.

Carriers also have a stake, since the company named in the report is the driver’s employer. The reports do not say whether the company faces any action. For now, the next date to watch is the driver’s court appearance on Dec. 29, when the case moves forward.

Source: CDLLife